dc.contributor.author |
Cao, Peng |
en |
dc.contributor.author |
Qian, M |
en |
dc.contributor.author |
StJohn, DH |
en |
dc.date.accessioned |
2011-12-18T22:38:41Z |
en |
dc.date.issued |
2005-10 |
en |
dc.identifier.citation |
SCRIPTA MATER 53(7):841-844 Oct 2005 |
en |
dc.identifier.issn |
1359-6462 |
en |
dc.identifier.uri |
http://hdl.handle.net/2292/10154 |
en |
dc.description.abstract |
High purity Mg–Al type alloys have a naturally fine grain size compared to commercial purity alloys with the same basic composition. This is referred to as native grain refinement. It is shown that native grain refinement occurs only in magnesium alloys containing aluminium. The mechanism is attributed to the Al4C3 particles existing in these alloys. |
en |
dc.language |
EN |
en |
dc.publisher |
Acta Materialia Inc. Published by Elsevier Ltd. |
en |
dc.relation.ispartofseries |
Scripta Materialia |
en |
dc.rights |
Items in ResearchSpace are protected by copyright, with all rights reserved, unless otherwise indicated. Previously published items are made available in accordance with the copyright policy of the publisher. Details obtained from http://www.sherpa.ac.uk/romeo/issn/1359-6462/ |
en |
dc.rights.uri |
https://researchspace.auckland.ac.nz/docs/uoa-docs/rights.htm |
en |
dc.subject |
magnesium |
en |
dc.subject |
grain refining |
en |
dc.subject |
native grain refinement |
en |
dc.subject |
Al4C3 |
en |
dc.subject |
SIZE |
en |
dc.title |
Native grain refinement of magnesium alloys |
en |
dc.type |
Journal Article |
en |
dc.identifier.doi |
10.1016/j.scriptamat.2005.06.010 |
en |
pubs.issue |
7 |
en |
pubs.begin-page |
841 |
en |
pubs.volume |
53 |
en |
dc.rights.holder |
Copyright: Acta Materialia Inc. Published by Elsevier Ltd. |
en |
pubs.end-page |
844 |
en |
dc.rights.accessrights |
http://purl.org/eprint/accessRights/RestrictedAccess |
en |
pubs.subtype |
Article |
en |
pubs.elements-id |
156324 |
en |
pubs.org-id |
Engineering |
en |
pubs.org-id |
Chemical and Materials Eng |
en |
pubs.record-created-at-source-date |
2011-12-19 |
en |