Forming limits for the bulk forming of solid wood

Penneru, Anjaneya; Bhattacharyya, Debes; Jayaraman, Krishnan

dc.contributor.author	Penneru, Anjaneya	en
dc.contributor.author	Bhattacharyya, Debes	en
dc.contributor.author	Jayaraman, Krishnan	en
dc.date.accessioned	2012-04-04T00:32:36Z	en
dc.date.issued	2009	en
dc.identifier.citation	Holzforschung 63(4):479-481 2009	en
dc.identifier.issn	0018-3830	en
dc.identifier.uri	http://hdl.handle.net/2292/16657	en
dc.description.abstract	The main objective of the current research work is to determine the forming limits of solid wood, radiata pine (Pinus radiata D. Don), under hot pressing conditions. During bulk forming of wood, the specimen surface develops non- uniform strains, which may lead to fractures in the material. For wood, as well as for wood products, there is an acute lack of proper damage zone characterisation. In view of this, the forming limit diagram for solid wood is introduced here from numerous trials.	en
dc.publisher	Walter de Gruyter	en
dc.relation.ispartofseries	Holzforschung	en
dc.rights	Items in ResearchSpace are protected by copyright, with all rights reserved, unless otherwise indicated. Previously published items are made available in accordance with the copyright policy of the publisher. Details obtained from http://www.sherpa.ac.uk/romeo/issn/0018-3830/	en
dc.rights.uri	https://researchspace.auckland.ac.nz/docs/uoa-docs/rights.htm	en
dc.title	Forming limits for the bulk forming of solid wood	en
dc.type	Journal Article	en
dc.identifier.doi	10.1515/HF.2009.080	en
pubs.issue	4	en
pubs.begin-page	479	en
pubs.volume	63	en
dc.rights.holder	Copyright: Walter de Gruyter	en
pubs.end-page	481	en
dc.rights.accessrights	http://purl.org/eprint/accessRights/RestrictedAccess	en
pubs.subtype	Article	en
pubs.elements-id	94593	en
pubs.org-id	Engineering	en
pubs.org-id	Mechanical Engineering	en
pubs.record-created-at-source-date	2010-09-01	en