A bi-objective cyclist route choice model

Show simple item record

dc.contributor.author Ehrgott, Matthias en
dc.contributor.author Wang, Yau en
dc.contributor.author Raith, Andrea en
dc.contributor.author Van Houtte, C en
dc.date.accessioned 2012-03-13T20:09:26Z en
dc.date.accessioned 2012-09-10T20:58:20Z en
dc.date.issued 2012 en
dc.identifier.citation Transportation Research Part A: Policy and Practice 46(4):652-663 2012 en
dc.identifier.issn 0965-8564 en
dc.identifier.uri http://hdl.handle.net/2292/19499 en
dc.description.abstract It is widely acknowledged that cyclists choose their route differently to drivers of private vehicles. The route choice decision of commuter drivers is often modelled with one objective, to reduce their generalised travel cost, which is a monetary value representing the combined travel time and vehicle operating cost. Commuter cyclists, on the other hand, usually have multiple incommensurable objectives when choosing their route: the travel time and the suitability of a route. By suitability we mean non-subjective factors that characterise the suitability of a route for cycling, including safety, traffic volumes, traffic speeds, presence of bicycle lanes, whether the terrain is flat or hilly, etc. While these incommensurable objectives are difficult to be combined into a single objective, it is also important to take into account that each individual cyclist may prioritise differently between travel time and suitability when they choose a route. This paper proposes a novel model to determine the route choice set of commuter cyclists by formulating a bi-objective routing problem. The two objectives considered are travel time and suitability of a route for cycling. Rather than determining a single route for a cyclist, we determine a choice set of optimal alternative routes (efficient routes) from which a cyclist may select one according to their personal preference depending on their perception of travel time versus other route choice criteria considered in the suitability index. This method is then implemented in a case study in Auckland, New Zealand. The study provides a starting point for the trip assignment of cyclists, and with further research, the bi-objective routing model developed can be applied to create a complete travel demand forecast model for cycle trips. We also suggest the application of the developed methodology as an algorithm in an interactive route finder to suggest efficient route choices at different levels of suitability to cyclists and potential cyclists. en
dc.publisher Elsevier en
dc.relation.ispartofseries Transportation Research Part A: Policy and Practice en
dc.relation.replaces http://hdl.handle.net/2292/14196 en
dc.relation.replaces 2292/14196 en
dc.rights Items in ResearchSpace are protected by copyright, with all rights reserved, unless otherwise indicated. Previously published items are made available in accordance with the copyright policy of the publisher. Details obtained from http://www.sherpa.ac.uk/romeo/issn/0965-8564/ en
dc.rights.uri https://researchspace.auckland.ac.nz/docs/uoa-docs/rights.htm en
dc.title A bi-objective cyclist route choice model en
dc.type Journal Article en
dc.identifier.doi 10.1016/j.tra.2011.11.015 en
pubs.issue 4 en
pubs.begin-page 652 en
pubs.volume 46 en
dc.rights.holder Copyright: Elsevier Ltd. en
pubs.author-url http://www.scopus.com/inward/record.url?eid=2-s2.0-84862784039&partnerID=40&md5=6dffa45db4269e93fc36f8ece17e1b7d en
pubs.end-page 663 en
pubs.publication-status Published en
dc.rights.accessrights http://purl.org/eprint/accessRights/RestrictedAccess en
pubs.subtype JOUR en
pubs.subtype Article en
pubs.elements-id 358220 en
pubs.org-id Engineering en
pubs.org-id Engineering Science en
dc.identifier.eissn 1879-2375 en
pubs.record-created-at-source-date 2014-06-06 en


Files in this item

Find Full text

This item appears in the following Collection(s)

Show simple item record

Share

Search ResearchSpace


Browse

Statistics