Muscle synergies may improve optimization prediction of knee contact forces during walking.

Show simple item record

dc.contributor.author Walter, JP en
dc.contributor.author Kinney, AL en
dc.contributor.author Banks, SA en
dc.contributor.author D'Lima, DD en
dc.contributor.author Besier, Thor en
dc.contributor.author Lloyd, DG en
dc.contributor.author Fregly, BJ en
dc.date.accessioned 2014-09-30T22:31:23Z en
dc.date.issued 2014-02 en
dc.identifier.citation Journal of biomechanical engineering, 2014, 136 (2), Article number 021031 en
dc.identifier.issn 0148-0731 en
dc.identifier.uri http://hdl.handle.net/2292/23061 en
dc.description.abstract The ability to predict patient-specific joint contact and muscle forces accurately could improve the treatment of walking-related disorders. Muscle synergy analysis, which decomposes a large number of muscle electromyographic (EMG) signals into a small number of synergy control signals, could reduce the dimensionality and thus redundancy of the muscle and contact force prediction process. This study investigated whether use of subject-specific synergy controls can improve optimization prediction of knee contact forces during walking. To generate the predictions, we performed mixed dynamic muscle force optimizations (i.e., inverse skeletal dynamics with forward muscle activation and contraction dynamics) using data collected from a subject implanted with a force-measuring knee replacement. Twelve optimization problems (three cases with four subcases each) that minimized the sum of squares of muscle excitations were formulated to investigate how synergy controls affect knee contact force predictions. The three cases were: (1) Calibrate+Match where muscle model parameter values were calibrated and experimental knee contact forces were simultaneously matched, (2) Precalibrate+Predict where experimental knee contact forces were predicted using precalibrated muscle model parameters values from the first case, and (3) Calibrate+Predict where muscle model parameter values were calibrated and experimental knee contact forces were simultaneously predicted, all while matching inverse dynamic loads at the hip, knee, and ankle. The four subcases used either 44 independent controls or five synergy controls with and without EMG shape tracking. For the Calibrate+Match case, all four subcases closely reproduced the measured medial and lateral knee contact forces (R2 ≥ 0.94, root-mean-square (RMS) error < 66 N), indicating sufficient model fidelity for contact force prediction. For the Precalibrate+Predict and Calibrate+Predict cases, synergy controls yielded better contact force predictions (0.61 < R2 < 0.90, 83 N < RMS error < 161 N) than did independent controls (-0.15 < R2 < 0.79, 124 N < RMS error < 343 N) for corresponding subcases. For independent controls, contact force predictions improved when precalibrated model parameter values or EMG shape tracking was used. For synergy controls, contact force predictions were relatively insensitive to how model parameter values were calibrated, while EMG shape tracking made lateral (but not medial) contact force predictions worse. For the subject and optimization cost function analyzed in this study, use of subject-specific synergy controls improved the accuracy of knee contact force predictions, especially for lateral contact force when EMG shape tracking was omitted, and reduced prediction sensitivity to uncertainties in muscle model parameter values. en
dc.format.medium Print en
dc.language eng en
dc.publisher ASME en
dc.relation.ispartofseries Journal of biomechanical engineering en
dc.rights Items in ResearchSpace are protected by copyright, with all rights reserved, unless otherwise indicated. Previously published items are made available in accordance with the copyright policy of the publisher. Details obtained from http://journaltool.asme.org/Help/AuthorHelp/WebHelp/1903.pdf http://www.sherpa.ac.uk/romeo/issn/0148-0731/ en
dc.rights.uri https://researchspace.auckland.ac.nz/docs/uoa-docs/rights.htm en
dc.title Muscle synergies may improve optimization prediction of knee contact forces during walking. en
dc.type Journal Article en
dc.identifier.doi 10.1115/1.4026428 en
pubs.issue 2 en
pubs.volume 136 en
dc.rights.holder Copyright: ASME en
dc.identifier.pmid 24402438 en
dc.rights.accessrights http://purl.org/eprint/accessRights/RestrictedAccess en
pubs.subtype Article en
pubs.elements-id 424058 en
pubs.org-id Bioengineering Institute en
pubs.org-id ABI Associates en
dc.identifier.eissn 1528-8951 en
pubs.number 021031 en
pubs.record-created-at-source-date 2014-10-01 en
pubs.dimensions-id 24402438 en


Files in this item

There are no files associated with this item.

Find Full text

This item appears in the following Collection(s)

Show simple item record

Share

Search ResearchSpace


Browse

Statistics