dc.contributor.author |
Dranebois, Clemence |
en |
dc.contributor.author |
Smith, D |
en |
dc.contributor.author |
Taylor, Mark |
en |
dc.contributor.author |
De Silva, Kaluachchi |
en |
dc.contributor.author |
Le Guen, M-J |
en |
dc.contributor.editor |
Heusser, M |
en |
dc.contributor.editor |
Mendon, S |
en |
dc.coverage.spatial |
New Orleans, Louisiana, USA |
en |
dc.date.accessioned |
2015-08-11T01:04:57Z |
en |
dc.date.issued |
2015 |
en |
dc.identifier.citation |
The Waterbourne Symposium; Environmentally friendly coating technologies, New Orleans, Louisiana, USA, 09 Feb 2015 - 13 Jul 2015. Editors: Heusser M, Mendon S. Proceedings of the forty-second Annual International Waterbourne, High Sloids and Powder Coatings Symposium. 103-111. 2015 |
en |
dc.identifier.isbn |
9781312840973 |
en |
dc.identifier.uri |
http://hdl.handle.net/2292/26656 |
en |
dc.description.abstract |
Differential scanning calorimetry (DSC) and rheology were used to determine correlations between extrusion processing parameters and curing behaviour of a low temperature curable powder coating. The important parameters in powder extrusion were found to be the viscosity of the melt, the heat stability and the residence time of the blend at a given temperature. Increasing the temperature of the barrel or the screw speed and working at low feeding rate were found to cause early reactions in the coating. Moreover, the powder coating needs to be extruded at an optimum viscosity to confer a good film formation during curing. |
en |
dc.relation.ispartof |
The Waterbourne Symposium; Environmentally friendly coating technologies |
en |
dc.relation.ispartofseries |
Proceedings of the forty-second Annual International Waterbourne, High Sloids and Powder Coatings Symposium |
en |
dc.rights |
Items in ResearchSpace are protected by copyright, with all rights reserved, unless otherwise indicated. Previously published items are made available in accordance with the copyright policy of the publisher. |
en |
dc.rights.uri |
https://researchspace.auckland.ac.nz/docs/uoa-docs/rights.htm |
en |
dc.title |
The influence of extrusion parameters on the cure of low temperature powder coatings by DSC and Rheology |
en |
dc.type |
Conference Item |
en |
pubs.begin-page |
103 |
en |
pubs.author-url |
http://issuu.com/thewaterbornesymposium/docs/proceedings_sample_for_website/7?e=18346968/14151396 |
en |
pubs.end-page |
111 |
en |
pubs.finish-date |
2015-07-13 |
en |
pubs.start-date |
2015-02-09 |
en |
dc.rights.accessrights |
http://purl.org/eprint/accessRights/RestrictedAccess |
en |
pubs.subtype |
Proceedings |
en |
pubs.elements-id |
489828 |
en |
pubs.org-id |
Engineering |
en |
pubs.org-id |
Chemical and Materials Eng |
en |
pubs.record-created-at-source-date |
2015-07-09 |
en |