The stress concentration produced by a hole near an interface or joint

Kelly, Piaras; Hills, DA; Nowell, D

dc.contributor.author	Kelly, Piaras	en
dc.contributor.author	Hills, DA	en
dc.contributor.author	Nowell, D	en
dc.date.accessioned	2015-09-22T23:51:37Z	en
dc.date.available	1993-05-18	en
dc.date.issued	1993-07	en
dc.identifier.citation	Proceedings of the Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, 1993, 207 (4), pp. 239 - 246 (8)	en
dc.identifier.issn	0954-4062	en
dc.identifier.uri	http://hdl.handle.net/2292/27041	en
dc.description.abstract	Solutions are presented for the stress concentration arising in bonded dissimilar elements weakened by a circular hole. The influence of both of the Dundurs constants (which quantify the mismatch in elastic properties of the two materials) is presented, and it is shown that the stress concentration produced is greater than that produced in an infinite body if the hole exists in the stiffer medium, and vice versa. The method of solution adopted is the distribution of dislocations around the periphery of the hole.	en
dc.language	English	en
dc.publisher	Sage	en
dc.relation.ispartofseries	Proceedings of the Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science	en
dc.rights	Items in ResearchSpace are protected by copyright, with all rights reserved, unless otherwise indicated. Previously published items are made available in accordance with the copyright policy of the publisher. Details obtained from http://www.sherpa.ac.uk/romeo/issn/0954-4062/ https://au.sagepub.com/en-gb/oce/the-green-route-%E2%80%93-open-access-archiving-policy	en
dc.rights.uri	https://researchspace.auckland.ac.nz/docs/uoa-docs/rights.htm	en
dc.title	The stress concentration produced by a hole near an interface or joint	en
dc.type	Journal Article	en
dc.identifier.doi	10.1243/PIME_PROC_1993_207_124_02	en
pubs.issue	4	en
pubs.begin-page	239	en
pubs.volume	207	en
dc.rights.holder	Copyright: Sage	en
pubs.author-url	http://pic.sagepub.com/content/207/4/239.abstract	en
pubs.end-page	246	en
pubs.publication-status	Published	en
dc.rights.accessrights	http://purl.org/eprint/accessRights/RestrictedAccess	en
pubs.subtype	Article	en
pubs.elements-id	42968	en
pubs.org-id	Engineering	en
pubs.org-id	Engineering Science	en
dc.identifier.eissn	2041-2983	en
pubs.record-created-at-source-date	2010-09-01	en