Abstract:
The fusing of panoramic camera data with laser scanner data will be discussed on measurement results obtained during verification tests using the Digital 360 Panoramic camera (M2) developed by German Aerospace Center (DLR) in cooperation with Kamera und System Technik GmbH (KST) and the imaging laser scanner (3D-LS) developed by Institute of Navigation University Stuttgart (INS). First the measurement setup will be presented. Here M2 and 3D-LS are used as independent individual sensors surveying the same target. Then the data sampling and preprocessing for each sensor will be explained and the problem of transforming both independent data sets into one common coordinate system will be addressed by discussing the results of the verification tests.
Description:
You are granted permission for the non-commercial reproduction, distribution, display, and performance of this technical report in any format, BUT this permission is only for a period of 45 (forty-five) days from the most recent time that you verified that this technical report is still available from the original CITR web site; http://citr.auckland.ac.nz/techreports/ under terms that include this permission. All other rights are reserved by the author(s).