dc.contributor.author |
Mubarok, Mohamad |
en |
dc.contributor.author |
Zarrouk, Sadiq |
en |
dc.date.accessioned |
2017-08-18T03:33:49Z |
en |
dc.date.available |
2017-05-31 |
en |
dc.date.issued |
2017-11 |
en |
dc.identifier.citation |
Geothermics, 70:17-37 November 2017 |
en |
dc.identifier.issn |
0375-6505 |
en |
dc.identifier.uri |
http://hdl.handle.net/2292/35201 |
en |
dc.description.abstract |
Power output from geothermal wells depends on the measured mass flow rate and flowing enthalpy during production (discharge) testing. Key question before testing the productivity is; will the well self-discharge or not after warm-up. This work demonstrates that the simplest and accurate methods to predict the well will selfdischarge or not are the Af/Ac method and the new water level to feed zone method. Five well discharge stimulation techniques are discussed and recommendations were given to the well-to-well stimulation when there is a self-discharge well nearby, while the air compression method should be the first choice in remote wells. |
en |
dc.language |
English |
en |
dc.publisher |
Elsevier |
en |
dc.relation.ispartofseries |
Geothermics |
en |
dc.rights |
Items in ResearchSpace are protected by copyright, with all rights reserved, unless otherwise indicated. Previously published items are made available in accordance with the copyright policy of the publisher. Details obtained from http://sherpa.ac.uk/romeo/issn/0375-6505/
https://www.elsevier.com/about/our-business/policies/sharing |
en |
dc.rights.uri |
https://researchspace.auckland.ac.nz/docs/uoa-docs/rights.htm |
en |
dc.rights.uri |
https://creativecommons.org/licenses/by-nc-nd/4.0/ |
en |
dc.title |
Discharge stimulation of geothermal wells: Overview and analysis |
en |
dc.type |
Journal Article |
en |
dc.identifier.doi |
10.1016/j.geothermics.2017.05.012 |
en |
pubs.issue |
17-37 |
en |
pubs.begin-page |
17 |
en |
pubs.volume |
70 |
en |
dc.rights.holder |
Copyright: The authors |
en |
pubs.author-url |
http://www.sciencedirect.com/science/article/pii/S0375650517301207 |
en |
pubs.end-page |
37 |
en |
pubs.publication-status |
Published |
en |
dc.rights.accessrights |
http://purl.org/eprint/accessRights/OpenAccess |
en |
pubs.subtype |
Article |
en |
pubs.elements-id |
631617 |
en |
pubs.org-id |
Engineering |
en |
pubs.org-id |
Engineering Science |
en |
dc.identifier.eissn |
1879-3576 |
en |
pubs.record-created-at-source-date |
2017-06-21 |
en |
pubs.online-publication-date |
2017-06-17 |
en |