JavaScript is disabled for your browser. Some features of this site may not work without it.
| dc.contributor.author | Liu, FJ | en |
| dc.contributor.author | Fang, MH | en |
| dc.contributor.author | Huang, Saifang | en |
| dc.contributor.author | Jiang, B | en |
| dc.contributor.author | Liu, YG | en |
| dc.contributor.author | Huang, ZH | en |
| dc.coverage.spatial | China | en |
| dc.date.accessioned | 2018-10-02T21:29:30Z | en |
| dc.date.issued | 2010-04 | en |
| dc.identifier.citation | Bulletin of the Chinese Ceramic Society 29(2):426-430 Apr 2010 | en |
| dc.identifier.issn | 1001-1625 | en |
| dc.identifier.uri | http://hdl.handle.net/2292/38270 | en |
| dc.description.abstract | FeMo-Al2O3 composite ceramics were prepared at 1600 ℃ holding for 2 h by pressureless sintered in reducing atmosphere, using FeMo70 alloy and α-Al2O3 as starting materials. The effect of addition of FeMo70 alloy on phase composition and the mechanical properties of FeMo-Al2O3 composite ceramics were studied. Results showed that phases of samples were mainly α-Al2O3, Fe2Mo and Fe6Mo7N2.The average grain size of Al2O3 matrix increased from 4 μm to about 15 μm when adding FeMo70 alloy. Rockwell hardness and fracture toughness of increased first and then decreased with the increasing amount of FeMo70 alloy. When 13wt% FeMo-Al2O3 composite ceramics of FeMo70 alloy were added, Rockwell hardness (HRA) and fracture toughness (KIC) of composite ceramics reached a maximum value of 88.3 and 3.7 MPa·m1/2, respectively. | en |
| dc.language | Chinese | en |
| dc.publisher | Tianjin Shi : Tianjin gui suan yan xue hui | en |
| dc.relation.ispartofseries | Bulletin of the Chinese Ceramic Society | en |
| dc.rights | Items in ResearchSpace are protected by copyright, with all rights reserved, unless otherwise indicated. Previously published items are made available in accordance with the copyright policy of the publisher. | en |
| dc.rights.uri | https://researchspace.auckland.ac.nz/docs/uoa-docs/rights.htm | en |
| dc.rights.uri | http://www.cnki.net/other/gonggao/bqsm.htm | en |
| dc.title | Preparation and mechanical properties of FeMo-Al2O3 composite ceramics | en |
| dc.type | Journal Article | en |
| pubs.issue | 2 | en |
| pubs.begin-page | 426 | en |
| pubs.volume | 29 | en |
| dc.rights.holder | Copyright: China Knowledge Network (CNKI) | en |
| pubs.end-page | 430 | en |
| pubs.publication-status | Published | en |
| dc.rights.accessrights | http://purl.org/eprint/accessRights/RestrictedAccess | en |
| pubs.subtype | Article | en |
| pubs.elements-id | 689819 | en |
| pubs.org-id | Engineering | en |
| pubs.org-id | Chemical and Materials Eng | en |
| pubs.record-created-at-source-date | 2017-10-11 | en |
Files in this item
There are no files associated with this item.
This item appears in the following Collection(s)
-
Journal Articles [23290]
Share
