A benchmarking part for evaluating and comparing support structures of additive manufacturing

Show simple item record

dc.contributor.author Jiang, Jingchao en
dc.contributor.author Stringer, Jonathan en
dc.contributor.author Xu, Xun en
dc.contributor.author Zheng, Pai en
dc.coverage.spatial Singapore en
dc.date.accessioned 2018-10-08T19:47:27Z en
dc.date.issued 2018 en
dc.identifier.issn 2424-8967 en
dc.identifier.uri http://hdl.handle.net/2292/39498 en
dc.description.abstract Nanyang Technological University Additive manufacturing technology has been rapidly developed and increasingly popular nowadays; its applications spread to almost every corner in our lives. However, when printing products with overhangs, support structures are often needed, resulting in extended build time, post-processing and material waste. Numerous papers have been published on reducing support structure consumption, thus minimizing the cost and manufacture time. However, there are still no benchmarking examples and criteria in the literature for support structure comparison, resulting in hard to distinguish which method is better than another, especially in the situation that they use different standards and geometries for their research. In this paper, a specific part is proposed as a standard geometry, all research with regard to support structure can compare the results based on this benchmarking part. Line and concentric support methods from Cura 2.6.2 based on an Original Prusa i3 MK2 printer are tested and demonstrated in this paper by using this benchmarking part. en
dc.description.uri http://event.ntu.edu.sg/pro-am2018/Programme/Pages/default.aspx en
dc.relation.ispartof 3rd International Conference on Progress in Additive Manufacturing en
dc.relation.ispartofseries Proceedings of the International Conference on Progress in Additive Manufacturing en
dc.rights Items in ResearchSpace are protected by copyright, with all rights reserved, unless otherwise indicated. Previously published items are made available in accordance with the copyright policy of the publisher. en
dc.rights.uri https://researchspace.auckland.ac.nz/docs/uoa-docs/rights.htm en
dc.title A benchmarking part for evaluating and comparing support structures of additive manufacturing en
dc.type Conference Item en
dc.identifier.doi 10.25341/D42G6H en
pubs.begin-page 196 en
pubs.volume 2018-May en
dc.rights.holder Copyright: The author en
pubs.author-url https://dr.ntu.edu.sg/handle/10220/41636 en
pubs.end-page 201 en
pubs.finish-date 2018-05-17 en
pubs.start-date 2018-05-14 en
dc.rights.accessrights http://purl.org/eprint/accessRights/RestrictedAccess en
pubs.subtype Conference Paper en
pubs.elements-id 735594 en
pubs.org-id Academic Services en
pubs.org-id Examinations en
pubs.org-id Engineering en
pubs.org-id Mechanical Engineering en
pubs.online-publication-date 2018 en


Files in this item

Find Full text

This item appears in the following Collection(s)

Show simple item record

Share

Search ResearchSpace


Browse

Statistics