Abstract:
New approaches to synthesize decorative black coatings on metallic surfaces are of significant research and commercial interest to manufacturing industries. In this work, decorative hard black coatings were deposited on a titanium surface by carbon ion implantation at ambient temperature. A 10 keV C+ beam was implanted on a Ti substrate to a fluence of 1–1.25 × 1018 C cm−2. Rutherford backscattering spectrometry and transmission electron microscopy results show that the implantation resulted in a bi-layered coating structure with a ~50 nm amorphous carbon layer at the surface followed by a ~50 nm amorphous titanium carbide intermixing layer deposited on top of a crystalline Ti surface. Raman spectroscopy confirms the formation of carbide intermixing layer and shows that the amorphous carbon layer has 15–20% sp3 content. Nanoindentation measurements show that the surface hardness of the implanted surface has increased by 72%, from 3.7 to 6.6 GPa, upon carbon implantation. Scratch tests further demonstrate a reduction in coefficient of friction in the implanted surface by 25%, signifying an improvement in wear-resistance of the coated materials. Colorimetry measurements reveal that carbon implantation reduces the luminosity of the Ti surface from 77 to 49 and chromaticity from 4.67 to 1.36, confirming incorporation of black color on Ti surface. The results demonstrate that C implantation onto a Ti surface at high fluence results in a black coating with high surface hardness and wear-resistance that can be employed in decorative surface applications for manufacturing industries.
