dc.contributor.author |
Rauch, M |
en |
dc.contributor.author |
Xu, Xun |
en |
dc.date.accessioned |
2011-07-17T23:51:35Z |
en |
dc.date.issued |
2010-06 |
en |
dc.identifier.citation |
International Journal of Manufacturing Research 5(3):327-352 2010 |
en |
dc.identifier.issn |
1750-0605 |
en |
dc.identifier.uri |
http://hdl.handle.net/2292/6932 |
en |
dc.description.abstract |
Typical applications of 5-axis machining have been found in many industries. However, 5-axis machining still faces a number of challenges. It introduces further complexity as well as flexibility owing to the additional degrees of freedom compared to 3-axis machining. The focus of this review is to provide a perspective view of the research effort towards 5-axis machining that has been carried out over the last ten years. It centres on machine tools including topics such as 5-axis machine tool structures, 5-axis machining tool paths, modelling and compensation of process errors, modelling of 5-axis machine tools and emerging parallel kinematics machines. Copyright © 2010 Inderscience Enterprises Ltd. |
en |
dc.relation.ispartofseries |
International Journal of Manufacturing Research |
en |
dc.rights |
Items in ResearchSpace are protected by copyright, with all rights reserved, unless otherwise indicated. Previously published items are made available in accordance with the copyright policy of the publisher. Details obtained from http://www.sherpa.ac.uk/romeo/issn/1750-0591/ |
en |
dc.rights.uri |
https://researchspace.auckland.ac.nz/docs/uoa-docs/rights.htm |
en |
dc.title |
Five-axis machining: Technologies and challenges |
en |
dc.type |
Journal Article |
en |
dc.identifier.doi |
10.1504/IJMR.2010.033470 |
en |
pubs.issue |
3 |
en |
pubs.begin-page |
327 |
en |
pubs.volume |
5 |
en |
dc.rights.holder |
Copyright: 2010 Inderscience Enterprises Ltd. |
en |
pubs.end-page |
352 |
en |
dc.rights.accessrights |
http://purl.org/eprint/accessRights/RestrictedAccess |
en |
pubs.subtype |
Article |
en |
pubs.elements-id |
151117 |
en |
pubs.org-id |
Engineering |
en |
pubs.org-id |
Mechanical Engineering |
en |
dc.identifier.eissn |
1750-0605 |
en |
pubs.record-created-at-source-date |
2013-06-05 |
en |