dc.contributor.author |
Xie, Sheng |
en |
dc.contributor.author |
Xu, Xun |
en |
dc.date.accessioned |
2011-07-21T22:08:42Z |
en |
dc.date.issued |
2006 |
en |
dc.identifier.citation |
INT J COMPUT INTEG M 19(6):627-638 Sep 2006 |
en |
dc.identifier.issn |
0951-192X |
en |
dc.identifier.uri |
http://hdl.handle.net/2292/6992 |
en |
dc.description.abstract |
Sheet metal product design, processes planning and manufacturing are normally carried out in a sequence of stages using different computer-aided software tools. There are many computer-aided design (CAD) systems to take care of product design, computer-aided process planning (CAPP) systems to generate optimal tool paths and plans and computer-aided manufacturing (CAM) systems for various manufacturing requirements such as punching or cutting. According to our literature search, there is no platform or system available that can efficiently integrate the CAPP and CAM and computer numerical control (CNC systems) in sheet metal product development processes. Although ISO 10303 AP207 was formally published by the ISO, its application is limited. This research attempts to develop a prototype STEP-compliant process planning system for sheet metal product development. The system has an interface to input CAD product data. It integrates software modules for nesting optimization, path optimization and planning, simulation, and machining parameters set-up and CNC machining. The focus of the paper is placed on the structure of the prototype STEP-compliant system, as well as the definition of STEP-compliant product data models and interfaces for creating a STEP-compliant programming environment, where the abovementioned software modules are integrated. |
en |
dc.language |
EN |
en |
dc.publisher |
Taylor & Francis Ltd. |
en |
dc.relation.ispartofseries |
International Journal of Computer Integrated Manufacturing |
en |
dc.rights |
Items in ResearchSpace are protected by copyright, with all rights reserved, unless otherwise indicated. Previously published items are made available in accordance with the copyright policy of the publisher. Details obtained from http://www.sherpa.ac.uk/romeo/issn/0951-192X// |
en |
dc.rights.uri |
https://researchspace.auckland.ac.nz/docs/uoa-docs/rights.htm |
en |
dc.subject |
computer-aided process planning |
en |
dc.subject |
STEP |
en |
dc.subject |
application protocol |
en |
dc.subject |
zero thickness and zero radii |
en |
dc.subject |
EXPRESS |
en |
dc.subject |
ST-developer |
en |
dc.title |
A STEP-Compliant Process Planning System for Sheet Metal Parts |
en |
dc.type |
Journal Article |
en |
dc.identifier.doi |
10.1080/09511920600623708 |
en |
pubs.issue |
6 |
en |
pubs.begin-page |
627 |
en |
pubs.volume |
19 |
en |
dc.rights.holder |
Copyright: 2006 Taylor & Francis |
en |
pubs.end-page |
638 |
en |
dc.rights.accessrights |
http://purl.org/eprint/accessRights/RestrictedAccess |
en |
pubs.subtype |
Article |
en |
pubs.elements-id |
71380 |
en |
pubs.org-id |
Engineering |
en |
pubs.org-id |
Mechanical Engineering |
en |
pubs.record-created-at-source-date |
2010-09-01 |
en |