dc.contributor.author |
Schmitt, KM |
en |
dc.contributor.author |
Young, RCD |
en |
dc.contributor.author |
Riddington, JR |
en |
dc.contributor.author |
Budgett, DM |
en |
dc.contributor.author |
Chatwin, CR |
en |
dc.date.accessioned |
2011-09-04T21:16:28Z |
en |
dc.date.issued |
2000 |
en |
dc.identifier.citation |
The International Journal of Advanced Manufacturing Technology 16(6):434-440 23 May 2000 |
en |
dc.identifier.issn |
0268-3768 |
en |
dc.identifier.uri |
http://hdl.handle.net/2292/7582 |
en |
dc.description.abstract |
The results from an investigation into the feasibility of using image processing in the quality control system at a particular brickworks is reported. Methods were developed that allowed the identification and measurement of cracks and surface inden-tations and protrusions, and the measurement of the area of uniform pink on the surface of the particular brick type considered. It is concluded that the methods used could be developed relatively easily into a commercial real-time quality control system, which could result in considerable cost savings. It is also concluded that quality control measurements additional to those considered could easily be incorporated into such a system. |
en |
dc.language |
EN |
en |
dc.relation.ispartofseries |
The International Journal of Advanced Manufacturing Technology |
en |
dc.rights |
Items in ResearchSpace are protected by copyright, with all rights reserved, unless otherwise indicated. Previously published items are made available in accordance with the copyright policy of the publisher. Details obtained from http://www.sherpa.ac.uk/romeo/issn/0268-3768/ |
en |
dc.rights.uri |
https://researchspace.auckland.ac.nz/docs/uoa-docs/rights.htm |
en |
dc.subject |
bricks |
en |
dc.subject |
colour measurement |
en |
dc.subject |
image processing |
en |
dc.subject |
manufacturing |
en |
dc.subject |
process control |
en |
dc.subject |
quality control |
en |
dc.title |
Image Processing Applied to Brick Quality Control |
en |
dc.type |
Journal Article |
en |
dc.identifier.doi |
10.1007/s001700050175 |
en |
pubs.issue |
6 |
en |
pubs.begin-page |
434 |
en |
pubs.volume |
16 |
en |
dc.rights.holder |
Copyright: 2000 Springer-Verlag London Limited |
en |
pubs.end-page |
440 |
en |
dc.rights.accessrights |
http://purl.org/eprint/accessRights/RestrictedAccess |
en |
pubs.subtype |
Article |
en |
pubs.elements-id |
33297 |
en |
pubs.org-id |
Bioengineering Institute |
en |
pubs.org-id |
ABI Associates |
en |
dc.identifier.eissn |
1433-3015 |
en |
pubs.record-created-at-source-date |
2010-09-01 |
en |